DJI Spark Battery Not Charging: 3 Reasons & Solutions

By clicking on the product links in this article, Rcraces may receive a commission fee to support our work. See our Terms.

DJI Spark is a known name for everyone who is interested in drones. But does it always make us satisfied? 

DJI Spark battery not charging is amongst the most difficulties experienced by DJI Spark drone owners. 

Want to know why our DJI spark battery not charging?

Most of the time the charger goes into hibernation mode. 6 to 8 hours of charger abandon is the solution to this problem. The proper temperature could be another problem. There is a specific temperature we need to follow when charging. A dead battery and a flat LiPo battery could be the reasons. 

To know all the trouble in detail along with solutions, we need to read the article thoroughly. 

Without any delay let’s proceed. 

DJI Spark Battery Charging Problem: 3 Reasons And Solutions

We’ll discuss the reasons for the DJI Spark batteries not charging and guide you to solve them. There could be many reasons like faulty charger damaged battery, outdated software, etc. 

They are discussed in detail below. Let’s take a look. 

Reason 1: Battery Went on Hibernation Mode

In certain cases, the battery may not be destroyed but rather in a state of hibernation. DJI batteries include sensor nodes created to protect the batteries from destruction, caused by high amperes and short circuits. 

The sensor nodes will safeguard the battery during extended storage by preventing it from being entirely discharged, which would lead to chronic damage.

The DJI batteries will enter hibernation mode, preventing the cells from becoming wholly expelled. We must carry the battery out of hibernation to get it starting to work afterwards.

Solution

All we must do to liven up the battery from hibernation is relate it to the rechargeable battery. After that, abandon it for 6-8 hours.

We may not even notice any charging exercise on the battery throughout this time. However, do not eliminate it for at least 8 hours. It will awaken from hibernation and resume normal behavior.

To get it out of hibernation mode speedier, use a more potent charger. The supplied directly are 5V-2.4A, 9V-2A and 12V-1.5A.

DJI spark charger is suggested

Here, the DJI spark charger is suggested.

Product 1 
Product 2 

Go and check the preferable one. 

To prevent this from happening, DJI initiated a hibernation configuration. When the power supply is not used for a few real-time.

It will go to hibernation mode, or major elements of the battery to “sleep” to safeguard the power supply from the unrestricted current flows. That is most likely why our DJI spark battery appears to be able to charge.

This is also prevalent when the batteries are still fresh and haven’t been charged. It leads people to believe they obtained a faulty battery when it is simply in hibernation mode.

Obtaining the power supply out of hibernation mode doesn’t necessitate much effort it just requires patience-

  • Turn on the battery with a fast press accompanied by a 3-second press.
  • Connect it to our DJI charger.
  • The battery will probably come out of hibernation mode without your intervention, which could take hours.

Reason 2: Battery Temperature 

The DJI Spark uses lithium polymer batteries. They are less famous than lithium-ion batteries but still quite good. The fuel cells have a wide threshold. 

But they have a specific heat capacity. LiPo battery will not charge if the temperature is too high or too low. There is also a good chance that charging the battery will affect it.

With frequent use, the battery can become overheated, especially if the sun is shining brightly. We should take it to a cool spot and let it cool for a while. Do this before trying to charge it. 

If we don’t provide warmth during the winter, the battery may become too cold. Throughout that time, the battery will not charge. It may be injured as a result of being unable to charge.

Solution

If we try to charge the drone immediately after using it, it may not react. Because the intelligent battery frames power input if the battery temperature exceeds a certain threshold. 

This is done to prevent explosions, swelling, and other problems. We don’t need to do anything about this. Simply unplug it and wait 30 minutes for it to cool down before charging ordinarily.

Only charge DJI Spark battery when the module temperature is above 5°C (41°F) and below 40°C (104°F). 

If we decide to charge our battery beyond this range, it will absolutely refuse to charge.  As the temperature has effects on batteries

Reason 3: Battery Firmware

An outmoded firmware seems to be another cause of an uncommunicative battery. This could be the cause of our battery still having some power but not charging. DJI drones include the DJI Go app. 

This app, which can be attached to the drone, has many features. If the app displays an inconstant firmware alert, it’s the cause of the device’s inability to charge. 

The app can regulate some of the drone’s operations. So, we’ll need to upgrade the firmware to restore full capabilities.

Solution

The solution is quite simple. Insert our battery into the drone, attach it to our phone, and check for firmware updates. If it asks us to update it, do so.

Of course, if the battery is entirely dead, this method will not work. So, if we can get the power supply out of hibernation and charge it to 30%. We should definitely do a firmware update to avoid this problem in the long run.

If DJI Go instructs refresh the firmware on our batteries, great. If not, attach the drone to DJI Assistant and perform a firmware reboot on each battery we own.

Charging Ports Cleaning

Sometimes we need to clean the charging ports to charge properly. You can still charge your lipo battery without chargers

Charging Ports Cleaning

For cleaning ports, bring a toothpick or roll a piece of paper or cotton into small tips. 

Input the tip with great care into the port and wobble it to slacken any grime. Offer the port some other burst of pressurized gas to clear away whatever we’ve eased.

And repeat for the mini’s port.

FAQs

How to detect DJI spark dead battery? 

There’s no way to determine if your battery is dead. Apart from turning it on and seeing red flashes. When it doesn’t, it may be dead. But it isn’t sure. Check if the device has had a limited lifespan in recent weeks or if it disperses arbitrarily. It indicates that it’s old and requires replacement.

When should we change the DJI spark charging brick?

It is preferable to use an authorized DJI charger because there is no assurance that any third-party or phone connector will wake up the device. We can charge our drone with our iPhone charging brick, but it may require more power than customary to come out of hibernation mode.

How to fix a DJI spark battery which is flat? 

A multi-functional charge controller can be used to repair a spark LiPo battery. Begin by recharging batteries with a NiMH charging cable at 0.1A. When it has retrieved to around 2-3 volts per cell, toggle to the LiPo configuration. Align the charge of the power supply until it’s completely healed.

Final Words

Now we know what we should do when the DJI spark battery not charging. No time for worries. Whenever we face a problem, we can fix it now on our own.

Look for dead batteries, faulty chargers or outdated firmware when facing a DJI Spark battery charging problem. Hope we have been able to help how to solve the issues.

Good day!

About the author

Travis Murray

I am Travis Murray, and my love for RC began in 2017. It gradually turned into a passion, leading me to become an RC enthusiast and blogger. I write in-depth reviews and DIY guides for RC enthusiasts to provide troubleshooting tips and insider knowledge to help starters find the hidden gems in the hobby.
Related Topics

Leave a Comment