xt60 vs deans

XT60 vs. Deans – A Head-to-Head Comparison


Connectors play a very vital role when it comes to connecting different components. But often some close competitors make it hard to choose the best one for you. Similar goes with XT60 and Deans.

So, XT60 vs. Deans, what are the differences?

While both of them are lightweight and high performers, there’s a difference in size between them. Also, their capacity and contact modules are different. There’s a price gap as well because one of them is cheap and the other is expensive. So, there’s a lot to differ between them.

The information that is packed here is very little for you to compare. But we’ve got you covered with a full comparison between them. 

So, proceed further to explore more about them.

XT60 vs. Deans: Quick Comparison

A quick glimpse of the main factors of the comparison helps greatly when you’re in a hurry. Here’s a chart containing the quickies to let you compare XT60 vs. Deans. Have a look at them.

Comparison Factor XT60 Deans
Build Material Nylon and Brass Hard Plastic
Connector Capacity 60A 25-50A
Size Comparatively Bigger Comparatively Smaller
Difficulty of Plugging Low High
Difficulty of Soldering Low High
Contact Module Bullet Pins Spring Flat Tabs
Price Low High

We hope you’ll get a concise idea of the whole comparison from this. Anyways, this was just a short conception. The detailed description still lies ahead.

XT60 vs. Deans: Detailed Comparison

Once you get to know the basics, the next step is to dive deeper into them. Here, in this case, we’ve discussed them all one by one. So, you’ll get to know about them very easily. Let’s move further.

1. Build Quality And Material

In terms of building materials, they are quite different. The XT60 is built of Nylon processed at high temperatures. And the spring pins there are built from brass. Better conductivity is ensured here with a layer of gold flash.

On the other hand, hard plastic is the main building material of Deans. And it contains a spring flat tab which is made of brass and gold coated.

When it comes to durability, the XT60 is more durable because of Nylon. It serves better than plastic. Plastics are comparatively less heat resistant as well. That’s why XT60 is the winner here.

2. Connector Capacity

The XT60 connector can handle 60A electricity. On the other hand, the rated capacity for Deans is 25-50A. It means that XT60 can carry 60A of current at maximum. Whereas, within the proper temperature rating, Deans connectors carry between 25A to 50 A. 

It is important to understand how to choose a proper connector for your components. As the XT60 can handle more current, it’s a safer option in this regard.

3. Connector Size & Plugging Difficulty

XT60 connectors are bigger compared to the Deans. So, this gives Deans an upper hand. Because compactness is something that you would look for in a connector.

However, XT60 connectors are pretty easy to plug in. But the Deans connectors are comparatively hard to plug in.

4. Connection Module

In terms of connection modules, the XT670 and the Deans are quite different. XT60 has bullet pins as its connection module. On the other hand, no such thing is observed in Deans. Rather, spring flat tabs are used as the connection module here.

This connection module gives Deans great advantages over XT60. Because this spring flat tab can handle the pressure of constant connectivity. But the bullet pins on XT60 are quite average in this regard. They may get loose after performing several cycles. And they can’t handle the constant connectivity pressure like flat tabs.

That’s why Deans reign in this segment.

5. Connection Suitability

XT60 is a great choice when you’re looking for easy connections to the battery. Unless there’s any battery cell connection error, bullet pins perform better in terms of connectivity. On the other hand, Deans don’t have such pins. They have flat tabs which are pretty rigid. Overall, it makes the connection process comparatively tougher. So, here XT60 offers better.

6. Soldering Sustainability

Soldering on Deans is comparatively a tough job. As there’s a spring flat tab, wires are soldered on the back of it. A heat sink works as an insulator in this regard. As Deans are made of plastic, they can melt while soldering. That’s why soldering is a tricky job here.

On the other hand, bullet pins in XT60 make it comparatively easier to solder. Also, soldered wires fit in easily with the pins and are more sustainable. As the build material is strong, it doesn’t melt easily while soldering or desoldering.

For these reasons, XT60 wins here.

7. Price

Price is often the most significant factor in terms of comparing two or more products. Aggressive pricing can attract a lot of attention and consideration at all times. This is where XT60 offers a better value because they’re priced lower. On the other hand, Deans are comparatively expensive. So, from the price perspective, the XT60 wins.

These were the main comparison factors to describe the XT60 vs. Deans battle.

Final Verdict – Which One to Choose

Deans connectors are quite old compared to XT60 connectors. So, if you’re looking for the latest ones, XT60 might be the way to go. However, due to being a long time in the market, Deans are quite compatible with most batteries.

XT60 connectors are quite cheap and the plugging is easy. So, it’s great for regular use. However, if you’re looking for heavy-duty connectors, Deans can offer better value. Because they can handle constant connectivity pressure. But in that case, the cost will be more. So, keep that in mind.

So, the better choice here lies in your purpose. Or else, both can perform better within their range.

Nowadays, there are so many fake products on the market. You can easily get conned by the ones selling the fake connectors. So, whether you purchase the XT60 or Deans, please follow our suggested links below.

Product 1
Product 2

Hope you’ll get the best connector for you from here. They are the trusted providers of these connectors.


Are XT90 connectors better than XT60 connectors?

Yes, XT90 connectors are better than XT60 connectors. They can handle more connectivity pressure and load. And they can withstand more power. However, they’re a bit more expensive than XT60. So, if you can spend more, XT90 is considerable.

Can the XT60 withstand water?

 XT60 connectors are not rated as “water-resistant”. However, they can withstand a small amount of water for a certain amount of time. But it’s not recommended for you. So, don’t try to test it under water. Keep it away from water as much as you can.

Is it possible for Deans to handle a 6S LiPo battery?

Deans can somewhat handle 6S although they’re not made for that on paper. So, the bottom line here is that you shouldn’t experiment with Deans with 6S LiPo batteries. This can cause the connector to fail.


We’ve compared a lot between XT60 vs. Deans and now it’s time to conclude. Hope you enjoyed going through the whole comparison.

No matter whichever connector you choose, they should work well under ideal conditions. So, purchase any of them that suits your requirements and get going.

This is all we had to say. Have a great time!

Leave a Comment

Your email address will not be published.

Scroll to Top