JB Weld Vs Gorilla Glue

JB Weld Vs Gorilla Glue- Which One Is Good For You?


Glues are glue. Right?

Well, yes and no…

You see there are types of glues out there. It’s really important to know which type of glue is better in which situation. 

So, now you must want to know about JB Weld Vs Gorilla Glue.

JB Weld works best on metal, and hard surfaces but is unable to adhere to oily surfaces. Whereas, Gorilla glue works on wooden surfaces but not on plastic. You can use JB Weld on fabric but you can’t do the same with Gorilla Glue. JB Weld has a safe formula but Gorilla Glue has a toxic formula.   

You got a little idea about these two products. However, there is a lot more to know about these two. We’re going to discuss it here. 

Let’s start!

JB Weld Vs. Gorilla Glue: Quick Comparison

Each of these products have different things to provide. Let’s see what these two products can offer you.


JB Weld

Gorilla Glue

Works best on Metal and Hard Surface Wooden surface
Surface Application Metal Surface, Ceramic, Glass, fiberglass, Wood, Fabric etc. Wood, Stone, Glass, Ceramic etc.
Strength 5020 PSI  4250 PSI
Set Time  Around 1 minute Around 10-45 seconds
Cure Time  15-24 hours 24 hours
Price Around $5.13 Around $9.17
Not Effective on Greasy; Oily; Wet Painted surface   Plastic surface made of Polyethylene, Polypropylene; Rubber with High Oil Surface
Toxic Formula No Yes

Now we know about JB Weld Vs Gorilla Glue. These glues provide quick solutions when you need to fix or stick metal, glass, ceramic etc. 

JB Weld and Gorilla Glue show their magic on different surfaces. One performs well fixing hard, metal-plastic surfaces, and the other does on wooden surfaces. It’s necessary that we use these products where they fit perfectly.

JB Weld Vs. Gorilla Glue: Everything You Should Know!

You might want to know how these products work and every other detail. Let’s see those details below –

Surface Application

JB weld works magically on metal and hard surfaces including ceramic, glass, plastic, fiber-glass, wood, fabric etc. You can use it inside your microwave oven. 

On the other side, Gorilla glue is basically known as Wood Glue. It works like magic on wood and it’s also applicable on glass, stone, ceramic etc.

You can use JB weld to fix your household stuff. The glue fixes the car’s rear view mirror, surface holes in plastics, agricultural equipment etc. JB water Weld works and molds perfectly if it’s applied on wet, leaking or underwater surfaces. 

Gorilla glue is the best option for fixing a broken wooden chair, table or other furniture.  

In order to apply JB weld on a broken hard surface, you have to mix the resin and hardener. Use a jar to mix them from both of the tubes. You can directly apply Gorilla glue from the tube and wait for it to dry up. 

JB Weld does not work or bond the greasy or oily, wet painted surface. It’s not effective on Flexible Rubbery surfaces, Leather, Vinyl etc. 

Gorilla glue doesn’t work on plastic surfaces. Plastics are typically made of polyethylene or polypropylene, flexible rubber with a highly oiled plasticized surface.

Strength, Price Set & Cure Time

JB Weld can hold the 5020 PSI(Per Square Inch). Compared to that, Gorilla glue can hold up to 4250 PSI easily. A tube of JB Weld can be bought for $5.13. A tube of Gorilla Glue can be found for $9.17

JB weld needs 1 minute to set on a surface and it takes 15-24hrs to cure. It typically takes a day to dry at 500 degrees Fahrenheit or 260 degrees Celsius. 

Gorilla Glue takes 1 minute to set and almost a day to cure. You can apply the gorilla glue at a temperature of 4-54 degrees celsius.

Heated temperature helps the mold to dry faster for JB weld. On the other hand, it takes longer to dry in cold temperatures. Gorilla Glue can remain together strongly from -40 to 100 degrees celsius after being dried up.

JB Weld Vs. Gorilla Glue: Are These Toxic?

Both of these products are made of resin. Resin is a sticky substance which helps broken things to be put together. 

Other chemicals are mixed with resin while producing these two products. These chemicals sometimes can be harmful if they are exposed to humans. 

JB Weld has chemicals in its formula but it’s not toxic. It’s not toxic in any state so it’s pretty safe to use. On the other hand, Gorilla Glue has a toxic formula. It’s pretty poisonous when it is close to human touch. However, it becomes less poisonous once the glue dries up.

Never ingest or smell Gorilla Glue. Always use a wooden or plastic stick while applying this glue. 

JB Weld Vs. Gorilla Glue: Which One Suits You?

JB Weld can be used on various types of surfaces. You have to mix two components equally before applying them. It does not stick or stay flexible which can be pretty tough while cleaning up. 

However, this glue is human-friendly and can fix so many things. You can even fix parts of your car or other electronics using this while avoiding soldering.

On the contrary, Gorilla Glue can fix wooden surfaces along with glass, ceramics etc. Although it has a toxic formula, you don’t have to mix different substances together. It can lessen the hassle. It remains flexible as a result you can easily clean up after your work. 

If you have no issue with putting extra effort before applying, you can go for JB weld.  Remember that it gets a little messy while cleaning up. Gorilla glue is always the best option for wooden things. You don’t have to mix anything before application.

Epoxy Vs. Gorilla Glue: Which One Is Stronger?

It’s a little challenging to choose one glue over another. In some situations, one adhesive may perform better than another. The other one may perform better in a different application comparatively. 

However, while choosing an adhesive, it’s important to take into consideration the different qualities of both glues. 

Epoxy is a two-part reactive polyepoxide. To put it another way, it’s a thermoset plastic. The two components of the epoxy interact with one another, producing heat and chemical processes. 

This combines the two components to produce an extremely strong material. Epoxy has the greatest shear strength of any glue.

Water-activated polyurethane, a distinct kind of plastic, is gorilla glue. Numerous adhesives and coatings employ polyurethanes. Gorilla Glue’s water activating feature contributes to preventing bonds from forming in unwanted places.

Gorilla glue and epoxy are both fantastic options. They are both stronger than the wood they hold together. Epoxy, on the other hand, bonds effectively with a wider variety of materials than Gorilla Glue. And it also has a high bending strength. 

Epoxy is, therefore, stronger than Gorilla Glue.

You might be wondering what other glues can fix the wooden surface. Some wooden glues are mentioned below –

Product 1
Product 2
Product 3

Hope these alternate glues for wooden surfaces help you in need. 


Why Is My JB Weld Not Getting Hard?

The improper mixture can be caused by a number of factors. The most important of which is to “mix very properly.” Scrape the surface of the mixing stick, as well as the container or surface you’re mixing on. Then scrape them once more.

How Do I Clean Up Gorilla Glue?

Wipe away any excess glue with a dry cloth as soon as possible. To remove wet adhesive, make short swipes rather than dragging it across the material. Make sure you don’t come into contact with your skin. A chisel, scraper or sandpaper can be used to remove cured glue.

What To Do If Gorilla Glue Gets On Skin?

Apply a liberal amount of petroleum jelly to the affected area. Rub the glued skin gently with your fingertips. A cotton ball or a soft-bristled brush until the glue comes off.


Now you know everything that you need to know about JB Weld Vs. Gorilla Glue. You know which glue should be used in a particular situation.

Always take precautions such as wearing hand gloves or using sticks to apply the glue. Never ever ingest or inhale the watery formula of Gorilla glue. If your body parts get exposed to Gorilla glue, clean the affected area immediately.

You have been provided with every detail you need to know. So now, choose your glue according to your needs.

Leave a Comment

Your email address will not be published.

Scroll to Top